Linea HS 32k CMOS TDI Cameras
Camera Performance and Features
41
Saving & Restoring Camera Setup Configurations
See the section Camera Information Category in Appendix A for GenICam features associated with
this section and how to use them
Relevant Features:
UserSetSelector
UserSetDefaultSelector
,
UserSetLoad
,
UserSetSave
An inspection system may use multiple illumination, resolution, and responsivity configurations in
order to cover the different types of inspection it performs.
The camera includes 16 user sets where camera setup information can be saved to and restored
from—either at power up, or dynamically during inspection.
The settings active during the current operation can be saved (and thereby become the user
setting) using the user set save feature.
A previously saved user setting (User Set 1 to 16) or the factory settings can be restored using the
user set selector and user set load features.
Either the factory setting or one of the user settings can be selected as the default setting, by
selecting the set in the user set default selector (Camera Power-up configuration option in the
Power-up configuration dialog accessed from the Camera Information category). The set selected is
selected as the default setting and is the set that is loaded and becomes active when the camera is
reset or powered up.
The relationship between these four settings is illustrated in Figure 18. Relationship between the
Camera Settings:
