Linea HS 32k CMOS TDI Cameras
The Linea HS 32k TDI Camera
11
Performance
1)
HL-HM-32K15S
Notes
Random Noise
< 0.1 DN rms (16 e
-
)
Typical
2)
Peak Responsivity
250 DN/nJ/cm
2
@670 nm
Digital Gain
1x to 10x
Analog Gain
1x, 2x, 4x or 8x
DC Offset
0 DN
Adjustable
Dynamic Range
70 dB
Typical
2)
Full Well
50,000 e
-
Typical
PRNU
< ±2%
At 50% saturation
3,4)
DSNU (FPN)
< ±2 DN
SEE
1 nJ/cm
2
At 670 nm
NEE
< 0.4 pJ/cm
2
At 670 nm
Integral non-linearity
< 2%
1)
Test Conditions unless otherwise specified:
o
8 bit, 1x gain
o
100 kHz line rate
o
Light source: White LED if wavelength not specified
o
Front plate temperature: +45º C
o
DN = digital number
2)
Random Noise below quantization limit cannot be measured accurately; use higher gain for
comparison purposes
3)
Calibration at 80% saturation, measurements at 50% saturation
4)
Light sources vary spectrally and spatially: re-calibrate cameras in actual system
5)
Specifications not guaranteed when operating in area mode
Environmental Specifications
Table 6: Environmental Specifications
Environmental Specifications
Storage temperature range
-20 °C to +80 °C
Humidity (storage and operation)
15% to 85% relative, non-condensing
MTBF (mean time between failures)
>100,000 hours, typical field operation
Flash Memory Size
Table 7: Camera Flash Memory Size
Camera
Flash memory size
All models
4 GByte
Certification & Compliance
Table 8: Camera Certification & Compliance
Compliance
