Falcon 4M Camera Manual
DALSA 03-032-20044-01
35
Snapshot Mode 1. Exposure concurrent with readout is allowed
If, having a minimum integration time of about 500 us is not acceptable, then Snapshot
Mode 2 can be used, below, which allows for integration times as low as 10 us at the
expense of concurrent integration and readout. Therefore, it is recommended to only use
Snapshot Mode 2 if your integration time must be below 500 us. This is also the reason
why Snapshot Mode 1 is the default mode. The following figure shows the timing
operation of Snapshot Mode 2. Notice that with Snapshot Mode 2 there is a delay of Y
between the rise of integration and when exposure begins.
Snapshot Mode 2. Exposure concurrent with readout is NOT allowed