78
•
Technical Specifications
Xtium2-CXP PX8 User's Manual
Technical Specifications
Xtium2-CXP PX8 Board Specifications
Digital Video Input & Controls
Table 21: Board Specifications
Input Type
CoaXPress Specifications Rev 2.0 and 1.x compatible
Common Pixel Formats
8, 10, 12, 14 and 16-bit mono, 8, 10 and 12-bit RGB and Bayer
Scanning
Area scan and Line scan
Resolution
note: these are Xtium2-CXP
PX8 maximums, not
CoaXPress specifications
Horizontal Minimum:
32 pixels per lane
Horizontal Maximum:
64kBs/line (Mono or Color)
Vertical Minimum:
1 line
Vertical Maximum:
up to 65536 lines—for area scan sensors
infinite line count—for line scan sensors
Bit Transfer Rate
1.250 Gbps, 2.500 Gbps, 3.125 Gbps, 5.000 Gbps, 6.250 Gbps, 10 Gbps
and 12.5 Gbps
Image Buffer
Available with 2 GB
Bandwidth to Host System Approximately 6.8 GB/s (maximum obtained is dependent on firmware
loaded and PC characteristics)
Controls
Compliant with Teledyne DALSA Trigger-to-Image Reliability framework
Comprehensive event notifications
Timing control logic for camera triggers and strobe signals
4 opto-coupled general inputs where 2 are shared acquisition trigger inputs
(RS-422/TTL/12V/24V)
Trigger inputs are programmable as active high or low (edge or level
trigger, at maximum input frequency of 100 KHz)
External trigger latency less than 100 nsec
8 LVTTL general Outputs where 1 is shared as Strobe Output
Quadrature (phase A & B) shaft encoder inputs for external web
synchronization: TTL or RS-422 input (mutually exclusive) maximum
frequency is 5 MHz
Supports multi-camera synchronization of 2 to 4 boards
I/O available on a DH60-27P connector (J7)
and on 40-pin TST-120-01-G-D (J8)
Processing
Dependent on user loaded
firmware configuration
Output Lookup Table
Flat Field/Flat Line Correction
Bayer Mosaic Filter
