The iDisplay Program
iDisplay is an application developed for PCs and Win32 based HMIs that can display
images and results from up to 8 BOA cameras. It is installed on the connected BOA
client when the iNspect Express application is accessed through the web server or with
the emulator. The application provides the following features:
Multiple, simultaneous image update with graphics and zoom
Selectable results panel (select by IP address of camera)
Solution switching and history recall by camera
Manual triggering
Tolerance editing for privileged users
Customer logo (installed using the “iUpgrade All” utility)
To launch iDisplay, either go to the windows command prompt, enter “iDisplay” and click
go, or open the program from the windows shortcut if installed:
Start>All Programs>Teledyne DALSA>iNspect Express Emulator for BOA>iDisplay
When launched for the first time, the dialog on the
right will prompt you to select which cameras to
connect for display. The list on the right shows all
the cameras that were found on the network
segment. Click on a camera to add it to the
configuration. Click “OK” to launch the program.
Next time the program is launched, it will only try
to connect to the cameras selected in the dialog. If
any cameras are not available, it will connect only
the cameras that are.
Note: The camera configuration can be changed by either clicking the “Configure”
button in the iDisplay GUI or launching the iDisplay program from the command prompt
with the config switch - “iDisplay /config”.
Version 4.3; 2017-11-20
25
BOA2-XA Installation
