V1.0.0 2016-05-02 W
e reserve the right to technical modifications, errors and misprints. © 2016 Dallmeier electronic
www.dallmeier.com
VMC Touch: Mounting Monitor Bracket
Ports Connection And Cables Installation
All trademarks identified by ® are registered trademarks of Dallmeier electronic.
Step 4: Attach Cables Into The Cable Conductors On The Rear Side
¾
Loosen the screws on the three cable conductors using a Phil
-
lips screwdriver (size PH2).
Fig. 14
¾
Place the two cables along the course of the cable conductors.
¾
Always make sure that the two cables are routed around the
hinge.
Fig. 15
¾
Insert the three cable conductors back into their positions.
¾
Attach the cable conductors with the screws.
Fig. 16
