18
COMMISSIONING – Mountera® Box | REV. 1.0.1 | © 2020 Dallmeier
9 Mounting, Connection and Commissioning
Mounting, connection and commissioning of the device may only be carried
out by qualified personnel.
WARNING
Personal injury caused by falling devices or collapsing supporting structure
Risk of death or serious injury
➡
Before mounting the Mountera® Box and the corresponding peripheral
equipment, follow the manufacturer’s instructions regarding the max-
imum permissible carrying capacity of the supporting structure (e.g.
ceiling or wall).
➡
When mounting the Mountera® Box, only use screws and, if necessary,
anchors/dowels that are suitable for the respective type (construction
material) of the supporting element, such as for example:
•
Plastic screw anchors for use in solid masonry materials (concrete/
brick)
•
Gravity or spring toggle anchors for use in drywall systems (plaster-
board)
IMPORTANT: Observe that the supplied mounting screws/anchors are
only suitable for use in concrete, aerated concrete and masonry.
➡
Before mounting or removing your Panomera® system or camera to or
from the Mountera® Box, always ensure that your Panomera® system
or camera is properly secured against falling with a secondary safety
component (safety cable) on the outside of the Mountera® Box.
In addition, strictly observe the locally applicable regulations (regional
and country-specific legal requirements and standards) regarding the
mandatory measures for securing your Panomera® system or camera
against falling while in operation or during maintenance.
Summary of Contents for Mountera Box with PSU
