dallmeier Mountera Box with PSU, Commissioning

Page: 12 / 64

12
COMMISSIONING – Mountera® Box | REV. 1.0.1 | © 2020 Dallmeier
6 General Notes
Scope of Delivery
The standard scope of delivery includes:
•
1× Foam pad with self-adhesive backing
•
4× Plastic frame anchor with hexagon head screw + pressed-on washer
(anchor diameter: 8 mm, anchor length: 100 mm,
nominal drill bit diameter: 8 mm)
•
1× Hexagon socket screw key (size 5)
•
1× Hexagon socket screw key (size 2.5)
•
1× Insulated female blade connector (push-on receptacle crimp terminal),
suitable for wire cross-sections from 1.5 to 2.5 mm²
•
1× Insulated spade connector (fork ring crimp terminal),
suitable for wire cross-sections from 1.5 to 2.5 mm²
•
1× Insulated spade connector (fork ring crimp terminal),
suitable for wire cross-sections from 4 to 6 mm²
•
1× Time-lag/slow-blow fuse T 4 A / 250 V AC (glass tube, ⌀ 5 × L 20 mm)
•
1× Mountera® Ceiling Bracket Box Adapter
•
1× Mountera® Box Pole Adapter
•
1× Drilling template
•
Product documentation
The scope of delivery may differ depending on the ordered equipment,
device variant or country of destination.
Transportation and Packaging
Store the original packaging for later transportation.
Dallmeier is not responsible for any damage resulting from unprofessional
or improper transportation.
The device should only be shipped in the original packaging.
If the original packaging is no longer available, ensure that the used packag-
ing sufficiently protects the device against damage, moisture, heat and cold.