dallmeier DMS 180 III, Installation And Configuration Manual

Page: 67 / 215

67 Dallmeier electronic GmbH & Co.KG
NOTE
For information on how to configure the Sensor
recording mode, please refer to the DVS 600
documentation.
8.2.6 Recording interval
The recording interval determines the amounts of time between
the recording of individual pictures. The setting 1 000 (sec.) means
that a picture is recorded once every second. If, for example, five
pictures are to be recorded per second, the value must be 0.200
(sec.).
IMPORTANT
Do not select "0.000" when setting the recording
interval.
With this setting, the maximum number of pictures
is recorded (up to 25) for each trigger (e.g. with
motion detection). Depending on the activity, this
would decrease the ring memory accordingly.
Recording interval normal
The value in the Recording interval normal field determines the
recording rate during normal operation.
* Setting only useful for standard tracks. X No entry can be made
** Number of pre-alarm pictures can also be "0".
z
Entry can be made
Recording-
modes
Continous
Motion
detection
Contact
Sensitivity
X
z
X
Contact
recording
mode
select
Event *
save *
Event *
save *
normal Sequencer
normal single
Toggle
Timer
Start
Contact
recording
duration
X
z
X
z
X
X
X
X
z
X
Pre-alarm
pictures **
X
X
X
z
z
z
z
z
z
z