dallmeier DMS 180 III, Installation And Configuration Manual

Page: 57 / 215

57 Dallmeier electronic GmbH & Co.KG
¾
If this playback is not to be seen on Monitor 2, remove the
marking in the checkbox next to Menu on Monitor 2 active
(Fig. 7-7). The standard sequencer mode is retained on Monitor
2.
7.6.2 Deactivating picture and menu display on Monitor 2
If you use a PS/2 mouse to operate the DMS/DLS, the display of
menus on the FBAS monitors is possible. These menus are shown
in accordance with the FBAS interface and are not identical to the
menus of the VGA interface.
When playing back recorded pictures, you will also see this playback
on the FBAS monitors.
¾
If you remove the marking next to Menu on Monitor 2 active,
both the display of the menus and the playback of recorded
pictures will be suppressed on Monitor 2.
The normal sequencer mode is retained on Monitor 2.
All access to the menus and the evaluation of recordings is thus
hidden from the viewer of Monitor 2.
Fig. 7-7