DAS-4 Eco
www.dallmeier.com
16
8 HDD Management
The
Hard disk management
shows all the hard disks and drives fittedin the recorder or
connected externally. Individual HDDs can be enabled and disabled for the recording pro-
cess.
All hard disk drives are enabled for recording in the default configuration
¾
Open the
Harddisk Management
dialogue via
Recording
>
HDD
Management
.
Fig. 8-1
The various drives are displayed separately by category (bus system) in a structure tree.
The total capacity available for recording is shown at the top right.
To enable or disable a hard disk drive for recording, check or uncheck the checkbox in the
Rec
column.
RAID Systems
It is possible to deactivate RAID. The various HDD’s must be activated manually for recor-
ding, as described above.
With RAID-1 an even number of hard disks with equal capacity must be used for the DAS-4
Eco. Those hard disks do not have to match the storage capacity of the hard disks used in
the recording device.
¾
To change the configuration, select one of the options offered.
¾
Confirm with
OK
.
NOTE
If any changes are made to the RAID settings, all recordings must be de-
leted.
The
Standard
button can reset all RAID settings. All HDD’s that are currently connected
will again be available for conf-guration