background image

DAS-4 Eco

www.dallmeier.com

8

3  General Notes

3.1 

Scope of Delivery

Included in the standard scope of delivery is:

1 x DAS-4 Eco

1 – 4 HDDs (as ordered)

1 x SATA cable

1 x Power supply cable (to be connected to the recorder)

1 x Documentation 

Installation and Commissioning

 (CD)

The scope of delivery may differ depending on the ordered equipment or device variant.
The device’s range of functions depends on the ordered equipment or device variant and-

may therefore not correspond with this document’s content. Certain functions and features-

may require an activation that is subject to costs.

3.2 

Transportation and Packaging

Store the original packaging for transportation at a later date. Dallmeier electronic is not 

esponsible for damage resulting from unprofessional/improper transportation. The good 

should only be shipped in their original packaging.

If the original packaging is no longer available, ensure that the packaging used sufficiently 

protects the unit against damage, moisture, heat and cold.

3.3 

Proper Usage

The 

DAS-4 Eco

 is a user-friendly and economic storage expansion (JBOD).

The housing of the only 1 HU high device is capable of holding up to 4 SATA HDDs within 

lockable slide-in units with a total capacity of max. 8 TB at present. They can be configu

-

red for redundant RAID 1 recording via the device.
In case of a hard disk failure, the HDDs’ Easy-Change functionality allows for a quick 

replacement of the hard disks from the front side of the device and therefore ensures 

the highest degree of maintainability possible. Two redundant high performance fans 

guarantee an optimal ventilation. Power is supplied directly via the 12 V DC output of the 

device. An additional power supply unit is not necessary.

Summary of Contents for DAS-4 Eco





















Reviews: