background image

DDF3000AV(-DN) / DDF3000AV(-DN) CasinoCam

®

4

Dallmeier electronic

1

This document

1.1

Validity

This document applies to the colour minidome DDF3000AV(-DN) / DDF3000AV(-DN)
CasinoCam

®

. It has been produced on the basis of version 2.1 (software).

The descriptions in this document apply to all above-mentioned camera versions. For
simplification reasons, the term “DDF3000AV(-DN)” is thus used.

If text passages require distinctions to be made between the cameras, the complete camera
name will be mentioned.

1.2

Documents

Commissioning

The quick guide headed “Commissioning“ lists the most important steps for the connection
and commissioning of the device.

Installation and Configuration (this document)

The document entitled “Installation and Configuration“ contains detailed descriptions of the
installation, connection, commissioning and configuration of the device. Safety instructions,
general notes and technical data are additionally provided.

The target audience is exclusively specially trained and authorized professionals (“installers“).

1.3

Conventions

This document contains various warning words and symbols that indicate potential sources
of danger. Various symbols and formats are used to maintain the clarity of the document.

DANGER

The warning word DANGER denotes an immediate danger
that may cause death or serious injury if it is not averted.

WARNING

The warning word WARNING denotes a possible danger that
may cause death or serious injury if it is not averted.

CAUTION

The warning word CAUTION denotes a possible danger that
may cause minor injury if it is not averted.

Summary of Contents for CasinoCam DDF3000AV


































Reviews: