background image

DDF3000AV(-DN) / DDF3000AV(-DN) CasinoCam

®

2

Dallmeier electronic

Informations about copyright, trademarks, design patents

© 2008 Dallmeier electronic

All rights reserved. This document may not be copied, photocopied, reproduced, translated,
transferred to an electronic medium or converted to a machine-readable form either whole or in
part without first receiving written permission from Dallmeier electronic GmbH & Co.KG.

We reserve the right to make technical modifications.

The manufacturer accepts no liability for damage to property or pecuniary damages arising due
to minor defects of the product or documentation, e.g. print or spelling errors, and for those not
caused by intention or gross negligence of the manufacturer.

Dallmeier electronic GmbH & Co.KG
Cranachweg 1
D 93051 Regensburg, Germany

www.dallmeier-electronic.com
[email protected]

All trademarks identified by 

®

 are registered trademarks of Dallmeier electronic.

All trademarks identified by *

)

 are trademarks or registered trademarks of the following owners:

Digital Pixel System of Pixim, Inc. headquartered in Mountain View, California, USA

Third-party trademarks are named for information purposes only.
Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identification of third-
party trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance
is no reason to assume that the respective trademark is unprotected.

Summary of Contents for CasinoCam DDF3000AV


































Reviews: