background image

DDF3000AV(-DN) / DDF3000AV(-DN) CasinoCam

®

22

Dallmeier electronic

‰

Details 1/2

Scenes full of contrast with strong backlights.

Details are displayed in high resolution.

The maximum dynamic range of the camera is used.

‰

Indoor / Shadow

Indoor scenes full of contrast.

The relevant details are in the shadow.

Detail resolution in the shadowy area is optimized.

Bright areas of the picture are displayed brighter than normal.

‰

Indoor

Preset for indoor scenes with medium contrast.

Details are displayed in high resolution.

Detail resolution in the bright area is optimized.

‰

Fluorescent

Use for indoor scenes with fluorescent light and low contrast.

Detail resolution in bright areas is optimized.

Typical flickering with neon lights is compensated.

‰

Low Light

Preset for low light scenes with slowly moving objects.

The closing and exposure time (shutter) can be adjusted manually between 2x and 8x.

NOTE

The following presets are only available in the
DDF3000AV(-DN) CasinoCam

®

.

‰

Poker Table

This Preset has been developed to meet the special requirements at the poker table
ensuring optimal identification of red and black cards.

‰

Gambling

A preset for games that require chips.

This preset allows the chip colors to be optimally displayed.

‰

Wheel

This Preset has been developed to meet the special requirements at the roulette wheel
ensuring optimal identification of the numbers and colors of the wheel.

‰

Slot Machine

This preset has been developed to meet the special requirements for slot machines
ensuring optimal identification of the symbols.

Summary of Contents for CasinoCam DDF3000AV


































Reviews: