8
INSTALLER’S INSTRUCTIONS
RELEASE 7.03
If YES is confirmed, the free dose button ( P 3) on each group head will operate, while by choosing NO
this function is locked out and only the programmable doses buttons operate
Push
►
or
◄
to change this parameter and press
OK
to confirm
After confirmation the display shows
C A S H - - C O N N E C T I O N
- - - Y E S - - - - - N O - - -
NO (the default) will blink. By confirmingYES , the machine will be allowed to start working with the cash
system. ATTENTION : by confirming YES without cash system avalaible,the machine will not lay out
either coffee and tea
Push
►
or
◄
to change this parameter and press
OK
to confirm.
After confirmation the display shows
- - G R I N D E R - - - - - - -
- - - Y E S - - - - - N O - - -
NO (the default) will blink. By confirming YES, the machine will be allowed to start working with the GCS
system. ATTENTION : by confirming YES without any connection between the machine and the grinder,
the machine will emit some acustic alarm signals while it wil lay out coffee.They will not be visualized in
the alarm list
Push
►
or
◄
to change this parameter and press
OK
to confirm.
If No is confirmed ,the display shows STEAM
If YES is confirmed ,the display shows
- - - - - % - G R I
N D I N G -
- - - - - -
- 5 - % - - - - - -
This parameter sets the erogation time range allowed within which the erogation itself is considered
correct referring to the lay out time already setted .Default is 5 %. Range is between 5 % to 20 %
Push
►
or
◄
to change this parameter and press
OK
to confirm. After confirmation the display shows
U P D A T E - - G R I N D I N G
- - - - - - - 1 0 - - - - - - -
By setting this parameter you can choose how many erogations of coffee you need before updating the
regulation of the grinder. Default is 10. Range is between 5 to 50
Push
►
or
◄
to change this parameter and press
OK
to confirm.. After confirmation the display shows
- - - S T E A M - - - - - - - -
- - - Y E S - - - - - N O - - -
NO (the default) will blink. Push
►
or
◄
to change this parameter and press
OK
to confirm.
If NO is confirmed the displays shows PIN NUMBER.
If YES is confirmed the display shows
- T E M P . - - - S T E A M - -
- - - - 4 5 . 0 ° C - - - - - -
This parameter controls the milk temperature . Default is 45° Degrees C .Range is between 45° Degrees
C to 70° Degrees C
Push
►
or
◄
to change this parameter and press
OK
to confirm.. After confirmation the display shows
- - - P I N - - N U M B E R - -
- - - - - - 0 0 0 0 - - - - - -
Set this parameter to create the setting up access code.
Without knowing it you can only enter in the visual and alarm menu
Keep pressing the OK button until the display exits the SETTING menu and displays
- - T E M P E R A T U R E S - -
S E T T I
N G S - - - D O S E S
push
►
or
◄
until
DOSES
blinks and press
OK
to access the settings submenu DOSES
