12
6.3
Capture thermal image
1. Install the battery or connect the power cable(Pay attention to the power polarity and
voltage).Connect the video output device or directly observe via inner OLED binocular
display.
2. Press “Power” rotary button to start device,after startup interface is finished,the
apparatus starts working and displays thermal image.
3. Remove the lens cover and aim to the target.Press “+” button and “-” button at the
same time to automatically focus on the target. Besides, shot press “AUTOMATIC” button
without menu to adjust focus in a single direction so as to capture the best thermal
image.
4. Adjust power switch brightness rotary button to get the suitable brightness to optimize
thermal image.
6.4 USB OPERATION
1. USB connection：
Insert one end of USB cable into external power input end and connect another end of
USB cable to PC.
2. USB operation：
Power on the camera, PC will prompt founding the new hardware and it can be used.
Meanwhile, there is a new “Removable disc (Disc drive)” in “My PC”, namely image storage
space in the camera. Then you can do Save, Change and Delete operations to the images in
the camera.
Note: while USB operation is in processing, you can not do Save, Delete and other
operations using function keys in the camera, or the image may be lost.
3. USB exit：
Power off the camera directly and then remove the USB cable. Or you can exit USB operation
using
under the PC right bottom corner.
