Doglegs
DALI IKON P
HANTOM
incorporates dogleg brackets for wall
or ceiling mounting. The brackets attach the loudspeaker
firmly to the rear of the surface on which it is mounted.
They extend out at a 90-degree angle when the screws
are tightened. The screws should be tightened so that
the loudspeaker sits securely in place – but be careful
not to tighten them too much. If you need to remove the
loudspeaker, loosen the screws approximately 5 to 10 turns
counterclockwise and the brackets will loosen their grip. Do
not unscrew more than 5 to 10 turns or the bracket may fall
off the screws.
Drop Wire
DALI IKON P
HANTOM
must be fitted with a drop wire to prevent
the speaker from falling in the event of fire, earthquake, etc.
To prevent injury or damage from a fall, fit a steel wire or
other non-flammable connection between a solid support
in the house (ceiling beam, wall stud, etc.) and the eyehook
on the IKON P
HANTOM
as shown.
STEEL WIRE
MAX. 30 CM/10” DROP
