1
A steel drop wire must be firmly attached between a solid
support in the house (ceiling beam, wall stud, etc.) and
the eyehook on the DALI IKON P
HANTOM
in order to hold
the speaker in case of a fall. This is particularly important
for ceiling mounting, where a falling speaker can be life
threatening!
Connect cable to the terminals - being careful to connect
the amplifier’s red (+) terminal to the loudspeaker’s red
(+) terminal and the amplifier’s black (-) terminal to the
loudspeaker’s black (-) terminal.
Loudspeaker cable must not hang loose from the terminals.
It must be securely fastened with cable ties or by other
means inside the wall. If left unsupported, cable can
gradually come loose, creating a poor electrical connection
between wire and terminals.
Turn on the system and listen to the loudspeakers before
final mounting to make sure that all connections are correct.
Insert the speaker in the wall opening and tighten the 6
screws in the loudspeaker brackets with the enclosed Allen
wrench/bit so that the speaker is firmly mounted in place. Be
careful to avoid over-tightening the screws and shredding
the thread.
Installation
STEEL WIRE
MAX. 30 CM/10” DROP
9.2“/23,3 cm
15,6“/39,6 cm
4“/10 cm
