CBU-DALI-GATEWAY
Device Manual
Made in Italy
DALCNET S.r.l.
36077 Altavilla Vicentina (VI)
–
Italy
Via Lake Garda, 22
Tel. +39 0444 1836680
REv.
25/01/2023
-
Pag.
4/11
WIRING DIAGRAM
As shown in the connection diagram, perform the following steps to install the product
Connect the normally open button to the INPUT terminals with the "
" symbol.
Be sure not to connect live parts to the INPUT terminals.
Connect the constant voltage SELV power supply to the DC IN terminal with the "+" and "-" symbols.
Make sure you are not using a power supply with a constant current output and check that the polarity of the cables is
correct.
Connect the DALI BUS on the "DALI OUT" terminals.
Like any other product with Bluetooth control, be sure not to place the product inside a metal case or placed near large metal
structures. The metal will greatly block the radio signal important for the operation of the device.
