MINIMAX
Page 39
Dismantling the drum body
The repair is performed on a flat surface with the drum connected to a trac-
tor and unfolded with the rings resting on the ground. It would be a great
help to have a crane or something similar available for both the dismantling
and assembly.
Replacement of the drum body on the side sections
If no crane is available, both axles on the side sections must be removed to
prevent the drum overturning.
Fig. 32
1.
Loosen the bolts (A)
2.
Attach the square pipe to the
side section and tighten the
strap lightly until the bolts (A)
are loose and can be re-
moved.
3.
The tilt cylinder is activated
and the drum is tilted up onto
the wheels
4.
The rings can be pulled away
from the drum.
If no crane is available, the drum's folded cylinder can be easily activated and
put in a position so that the bolts are loose and can be removed.
Mounting
1.
The rings are placed in a position corresponding to the placement
when the drum is unfolded.
2.
The drum is unfolded and tilted carefully down over the rings.
3.
Mount the bolts (A)
There must be no people within the operating radius when/if the hydraulic
system is activated.
Replacement of the centre drum body
Fig. 33
1.
Loosen the bolts (A)
2.
The tilt cylinder is activated,
the drum is tilted towards the
wheels, the drum rings sup-
port the base and the bolts
are loose.
3.
Remove the bolts
4.
The drum is tilted up onto the
wheels.
5.
The rings can be pulled away
A
A
Summary of Contents for MINIMAX 950
Page 2: ......
Page 33: ...MINIMAX Page 33 8 Screw the cap on and tighten ...
Page 44: ...MINIMAX Page 44 Spare parts ...
