DALBO MINIMAX 950, User Instructions

Page: 18 / 44

MINIMAX
Page 18
Adjustment of Central Section
Fig. 6
With the MINIMAX unfolded (see
“ Driving and operating ”) check if
the bolts (A) have approx. 10 mm
air to the pipe (B).
The central section must be hori-
zontal to achieve the best result in
the field. In addition, the 3 square
tubes must be in line (same height
from the ground)
If the bolts (A, Fig. 5) go against the pipe and the centre frame is not horizontal, the
bolts must be adjusted. Likewise, the bolts should be adjusted if there is too large a
space between the frame and the bolt head.
Fig. 7
1. Loosen the lock nut (A).
2. Adjust the bolt (B) up/down.
3. Tighten the lock nut (A).
4. Check if the frame is horizon-
tal and if the height of the bar
fits.
5. If the bolts (B) do not move
against the bar, drive the trac-
tor slightly forward and check
the setting.
Adjustments of stop for folding
Fig. 8
To ensure the correct position of
the side sections during transport,
it is possible to adjust the rear
stop (A) for the side sections
A
B
A
B
A