FRONTFLEX
Page 15
Mechanical transport lock
The hydraulic models must be secured with a transport lock during transport.
This prevents the centre section and the side sections from swaying from side to side.
The transport lock must be secured with a split pin (A), Fig.
5 and a split pin ring (B), Fig.
5.
Fig.
5
Actuating the transport lock
Remove the transport lock before use on site. This is done by following the assembly se-
quence in reverse. Then, position it as shown (A) in Fig.
6.
Fig. 6
Adjustment of the side and centre sections
A
B
A