CULTITRAIL
Page 17
Setting up
CULTITRAIL comes with factory settings, but must be finely adjusted before use.
Numerous adjustment options make the machine more flexible and ensure maxi-
mum use.
Basic setting
Fig. 7
To achieve uniform effect on
the soil, it is important that
the main frame is horizontal
when in use.
Adjustment is made using the
top bar (A). Extend to raise
the front end of the harrow
frame.
Remember to tighten the re-
verse thread wing nut (B)
when adjustment is complete.
If the harrow is raised, the weight on the top bar will be very heavy. Lower before
adjusting top bar. Adjustment can be made easier by pressing the front cracker-
board hard into the soil using the tractor hydraulic system.
Working depth
Fig. 8
Adjust working depth
using the hose length
limiters fitted on the 2
wheel-lift cylinders on
the centre wheel frame.
The spacer blocks (A)
can be swung in front of
the lift cylinders.
Raise the harrow to free
the spacer blocks.
A
B
A
B
Summary of Contents for CULTITRAIL 500
Page 1: ...CULTITRAIL EN 500 600 cm Serial no 00100 XXXX ...
Page 2: ......