DALBO CULTIMAX 650, Manual

Page: 24 / 26

CULTIMAX
Side 24
6. Attach the split pin pos. 20.
7. Fill up the hub cap pos. 21 with ¾ ball bearing grease and mount the hub
cap.
Replacing Wearing Parts
Unfold the CULTIMAX and position securely to avoid the danger of being trapped
underneath, and to avoid the machine falling. Distance pieces can be mounted on
the wheel cylinders so the wearing parts do not touch the ground.
Fig. 17
The wearing parts (A) are reversible
and are bolted-on with a bolt. Turn or
replace the wearing parts before wear
occurs on the tine.
When turning the wearing parts reuse
the old bolts, but when points are re-
placed new bolts should be used.
If dirt or the like is present between
tine and wearing part, it should be re-
moved.
Crackerboard
Fig. 18
The wearing parts on the disc tines
should be changed when they are worn
down, to the extent that the work result
is no longer satisfactory, or before the
tine start to wear down.
The wearing part can be moved to hole
(A), if needed.
A
A