Dal Zotto Rita, User Manual

Page: 34 / 140

34
WArningS
The instruction manual is an integral part of the product: make sure that it always accompanies the appliance, even if transferred
to other owners or user or is transferred to another place. If it is damaged or lost,request another copy from the area technician.
This product must be destined for the use for which it has been expressly realised. The manufacturer is exempt from any liability,
contractual and extracontractual, for injury/damage caused to persons/animals and objects, due to installation, adjustment
and maintenance errors and improper use.
installation must be performed by qualified staff, which assumes complete
responsibility for the definitive installation and consequent good functioning of the product installed. it is necessary to
bear in mind all laws and national, regional, provincial and town council Standards present in the country the appliance
has been installed.
Dal zotto S.p.A. cannot be held responsible for the failure to comply with such precautions.
after removing the packaging, ensure that the content is intact and complete. If not so, contact the dealer where the appliance
was purchased.
all electric components that make up the product must be replaced with original spare parts exclusively by an authorised after-
sales centre, thus guaranteeing correct functioning.
SAFety
Š
The stove must not be used by persons (including children) with reduced physical, sensorial and mental capacities or who
are unskilled persons, unless they are supervised and trained regarding use of the appliance by a person responsible for their
safety.
Š Children must be controlled to ensure that they do not play with the appliance.
Š Do not touch the stove when you are barefoot or when parts of the body are wet or humid.
Š The safety and adjustment devices must not be modified without the authorisation or indications of the manufacturer.
Š
Do not pull, disconnect, twist electric cables leaving the stove, even if disconnected from the electric power supply mains.
Š
It is advised to position the power supply cable in a way that it does not come into contact with hot parts of the appliance.
Š
The power supply plug must be accessible after installation.
Š
Do not close or reduce the dimensions of the airing vents in the place of installation. The airing vents are indispensable
for correct combustion.
Š
Do not leave the packaging elements within reach of children or unassisted disabled persons.
Š
The hearth door must always be closed during normal functioning of the product.
Š
When the appliance is functioning and hot to the touch, especially all external surfaces, attention must be paid
Š
Check for the presence of any obstructions before switching the appliance on following a prolonged standstill period.
Š
The stove has been designed to function in any climatic condition (also critical). In particularly adverse conditions (strong
wind, freezing) safety systems may intervene that switch the stove off. If this occurs, contact the technical after-sales service
and always disable the safety system.
Š If the flue should catch fire, be equipped with suitable systems for suffocating the flames or request help from the fire
service.
Š This appliance must not be used to burn waste.
Š
Do not use any inflammable liquids for ignition.
Š
During the filling phase do not allow the bag of pellets to come into contact with the product.
Š
The majolicas are top quality artisan products and as such can have micro-dots, crackles and chromatic imperfections.
These features highlight their valuable nature. Due to their different dilation coefficient, enamel and majolica produce
crackling, which demonstrate their effective authenticity. To clean the majolicas, it is recommended to use a soft, dry cloth. If
a detergent or liquid is used, the latter could penetrate inside the crackles, highlighting the same.
rOutine MAintenAnce
Based on the Decree 22 January 2008 n°37 art.2, routine maintenance means interventions aimed at reducing degradation from
normal use, as well as dealing with accidental events entailing the need of first interventions, which however do not modify the
structure of the system upon which one is intervening or its intended use according to the prescriptions foreseen by technical
standards in force and by the manufacturer's use and maintenance booklet.
engLiSH