DAL-BO Maxiroll 1030 2008, Manual

Page: 7 / 42

Maxiroll 2008
Page 7
Hydraulics

Lower machine fully for any repair work on the hydraulic system. Relieve
hydraulic pressure, switch engine off and remove ignition key.

Clean hydraulic connections thoroughly before reconnecting. When con-
necting hydraulic hoses to tractor hydraulics, ensure they are not under
pressure.

Bleed the hydraulic system thoroughly after any repairs.

Check hydraulic hoses regularly for defects such as cracks, splits, crimps,
wear or breaks. Defective hoses must be replaced immediately.

Avoid spilling oil on the ground. If oil is spilt, collect and deliver to a de-
struction point.

Clean hands thoroughly after contact with oil and grease. Change oil-
stained clothing immediately. Hydraulic oil can be harmful to the skin.

Hydraulic oil released under high pressure can penetrate the skin and
cause severe injury. In the event of injury, seek medical help immediately.
Mounting

Danger of crushing! Ensure no personnel are between implement and
tractor, or between the parts to be connected.
Maintenance and repair

Ensure machine is adequately supported or fully extended for all repair
and maintenance work. Ensure tractor and machine are properly braked,
engine stopped and ignition key removed.

Tighten all screw connections after a few hours use. Check all screw con-
nections regularly and tighten as required.
Check all split pins and bolts to
avoid mechanical failure.

Dispose of oil, grease and filters in accordance with local environmental
protection rules.
Road transport

All safety and warning precautions mandatory by law must be fitted and
tested before transporting the machine on public roads. The driver is re-
sponsible for correct lighting and warning signs in accordance with traffic
regulations.