Daktronics WR-2101, Display Manual, Page: 8 / 38

Mechanical & Electrical Installation
4
2 Mechanical & Electrical Installation
Mechanical Installation
Reference Drawings:
Mechanical Spec, WR-2102-13 ......................................................................... DWG-220815
Mechanical Spec, WR-2101-13 ......................................................................... DWG-220834
Mechanical Spec, WR-2103-13 ......................................................................... DWG-220856
Mechanical Spec, WR-2104, 2105, 2106 .......................................................... DWG-220904
All Daktronics Matside Jr. wrestling scoreboards may be displayed on the floor on a table,
or mounted on an optional tripod. Use only the tripod (part # A-1580) and adapter (part
# HS-1306) supplied by Daktronics. DWG-220815 , DWG-220834 , DWG-220856 , and DWG-
220904 in Appendix A show how to mount the display on a tripod. Locate the holes on
the bottom of the scoreboard and secure the display to the tripod adaptor using the
hardware provided.
The single-sided wrestling scoreboard (WR-2101) may also be wall mounted (the two-
and three-sided models cannot). Refer to DWG-220834 for mounting keyhole locations
on the back of the display. Due to the variety of wall materials used in sports facilities,
Daktronics cannot anticipate a user’s needs or provide mounting hardware suitable for
every installation. Mounting hardware may be purchased at a local hardware store.
Choose a method of installation that will safely support the weight of the display.
Note: Do not use the carrying handle to permanently suspend the display.
Electrical Installation
Reference Drawings:
Electrical/Signal Spec, WR-2102-13 .................................................................. DWG-220821
Electrical/Signal Spec, WR-2101-13 .................................................................. DWG-220850
Electrical/Signal Spec, WR-2103-13 .................................................................. DWG-220875
Electrical/Signal Spec, WR-2104, 2105, 2106 ................................................... DWG-220903
Electrical installation involves routing power and control signal wiring to the displays.
Refer to DWG-220821 , DWG-220850 , and DWG-220875 in Appendix A for detailed power
and signal connection diagrams for each wrestling scoreboard model.
Power
Each display features a 120 VAC power cord with a three-prong plug. Install a grounded
receptacle near the equipment so that the power cord can easily reach it. The control
console requires a 120/240 VAC receptacle and uses less than 1 Amp of power.
Displays operating on 240 VAC are also available, and they are shipped equipped with a
universal power plug.
Models WR-2104, WR-2105, and WR-2106 receive power and signal from the WR-2101,
WR-2102, or WR-2103 scoreboard, respectively. Refer to DWG-220903 for illustration on
how the units are connected.