Daktronics WR-2101, Display Manual, Page: 15 / 38

Scoreboard Options
11
4 Scoreboard Options
Horns
Matside Jr. scoreboards are equipped with a 120 VAC vibrating horn mounted behind
the lower-front panel. The horn sounds automatically when the period clock counts
down to zero, or when manually triggered by the operator using the control console.
Adjusting Horn Volume
CAUTION: The horn is a 120 VAC device. Turn off the power before adjusting the horn.
The volume for the electronic, buzzer-type horn is set at its maximum level at the factory.
If the horn is too loud, reduce its volume by adjusting the setscrew mounted in the front of
the horn. A plastic tip on the screw touches the horn’s diaphragm, reducing the volume.
Turn the screw clockwise and test the volume by operating the horn from the scoreboard
control console. Continue adjusting and testing until the desired volume level is obtained.
Note that with spectator noise, the horn will not seem as loud as when it is being tested in
an empty area, so be sure to set the volume according to the acoustics of the facility.
Changeable Captions
Reference Drawings:
Caption Panel Placement, WR-2101, -2102, -2103 ......................................... DWG-225545
Matside Jr. scoreboards are capable of scoring several other sports in addition to
wrestling, including basketball, gymnastics, and volleyball. In order to score gymnastics
and volleyball, the MATCH caption can be covered up with different scoring captions.
These captions are shipped inside the scoreboard. Refer to DWG-225545 in Appendix A
for the proper procedure on changing the scoreboard captions.
Ad Panels
Reference Drawings:
Mechanical Spec, Non-Backlit Ad Panel Attachment .................................. DWG-220915
Refer to DWG-220915 in Appendix A for information on installing optional ad panels to
the top of the scoreboard.