Mechanical Installation
4
Display Lifting
The top of the display is equipped with
1
/
2
" eyebolts for lifting the display. Lift the display
using a lifting bar. Use every eyebolt, and maintain a 90° lifting angle as shown in
to prevent eyebolt failure.
The eyebolts are designed to carry only the weight of the display cabinet. Do not lift the
mounting structure or other additional weight. Do not permanently support the display
with the eyebolts.
Note:
Leave 4" (10 cm) of unobstructed space above the display so the eyebolt can
be removed. No clearance is required once the eyebolt is removed.
Display Mounting
Securely mount each display to a suitable mounting structure provided by others.
Daktronics attached clip angles to the display for mounting. Use all clip angles when
mounting the display.
Use appropriate hardware to support the weight of the display. Have a qualified
engineer inspect the mounting structure.
Note:
Daktronics is not responsible for mounting methods or the structural integrity of
support structures provided by others.
After installing the display, inspect the top and sides of the display for any openings
that may allow moisture to enter the display. Seal openings with silicone or another
waterproof sealant. Not sealing openings may void the warranty.
Figure 2:
Correct Lifting Procedures
