Replacing Parts
20
PLR Replacement
The PLR is located behind the third module up from the bottom in the first column of
on
page 14
. If the display has two PLRs, they are located
behind the third and fifth columns. PLRs can be found in both Primary and Mirror display
faces as well as all sections of a sectional display.
1.
Remove the module in front of the PLR.
2.
Disconnect the two SATA cables, fiber cables, and power cable to the PLR.
3.
Loosen the screw at the top of the PLR mounting plate.
4.
Lift the mounting plate up and out of the display.
5.
Insert the new PLR with mounting plate and tighten the screw.
6.
Insert the two SATA cables, fiber cables, and power cable in the appropriate
locations.
Note:
Do not allow module to hang by its cables.
Summary of Contents for VANGUARD VC6
Page 4: ......
