Daktronics TN-2011, Display Manual

Page: 5 / 94

Introduction 1-1
Section 1: Introduction
This manual explains the installation of Daktronics LED Tennis Scoreboards , including
Models TN-2010 , TN-2011 , TN-2018 , TN-2029, TN-2032, TN-2037 and TN-2042 . The
manual also provides details for display maintenance. For other questions regarding the
safety, installation, operation, or service of these systems, contact Daktronics. Customer
Service Help Desk telephone numbers are listed on the cover page of this manual.
1.1 How To Use This Manual
Important Safeguards:
1. Read and understand these instructions before installing the display.
2. Do not drop the control console or allow it to get wet.
3. Properly ground the scoreboard with a grounding electrode at the display
location.
4. Disconnect power when the display is not in use.
5. Disconnect power when servicing the display.
6. Do not modify the structure or attach any panels or coverings to the display
without the express written consent of Daktronics, Inc.
Figure 1 , below, illustrates the Daktronics drawing numbering system. Daktronics
identifies individual engineering drawings by the drawing number (7087-P08A-
69945 in the example), which is located in the lower right corner of the drawing.
This manual refers to drawings by their last set of numbers and the letter preceding
them. The example would be
Drawing A-69945 .
Reference drawings are grouped and inserted in alphanumeric order in Appendix A .
Listed below are a number of drawing types commonly used by Daktronics, along
with the information each is likely to provide.
System Riser Diagrams: overall system layout from control room to
display, power, and phase requirements.
Shop Drawings: fan locations, transformer locations, mounting
information, power and signal entrance points, and access method (front or
rear).
Schematics: power wiring, signal wiring, panel board or power termination
panel assignments, signal termination panel assignments, and transformer
assignments.
Figure 1: Daktronics Drawing Label