Daktronics TN-2010, Display Manual

Page: 23 / 94

Electrical Installation
4-5
The radio transmitter and receiver are not standard equipment. This setup requires a
control console such as the All Sport, equipped with radio output. The display
receives control signal via a radio receiver mounted internally to the front panel. The
receiver plugs into the power terminal block in the driver/power enclosure. Refer to
Drawing A-182349 for more information about the radio receiver.
For additional information about this option, contact your Daktronics representative;
for complete information on radio communications, refer to the All Sport 5000
Series control console operation manual,
ED-11976 .