Daktronics Sportsound SSR-300, Operation Manual

Page: 22 / 42

18 Setup & Operation
3.9 Hearing Assist System Operation
Basic instructions are described below and shown in
Figure 27
. For more information, refer to the
Listen
®
LT-800 Stationary Transmitter
,
Listen
®
LR-4200 iDSP Receiver
, and
Listen
®
LA-122 Universal Antenna Kit
Users Manuals
.
1. Press POWER to turn on the transmitter if it is not already on.
2.
Use the
CHANNEL SELECT
buttons to select a channel.
3. Plug the Ear Phone/Neck Loop lanyard into the 2 jacks on top of the receiver, and then connect the
Ear Speaker into the jack on the lanyard.
4.
Press and hold the power button for 1 second to turn on the receiver. (To turn off the receiver, press
and hold the power button for 3 seconds.)
5. Verify the channel number matches on both the receiver and the transmitter. To change the channel,
press and hold the up and down buttons at the same time for 5 seconds, and then use the up and
down buttons to select the channel. Press the power button to save.
Note: Receivers use rechargeable Lithium-ion batteries. Always charge receivers at least 2.5 hours
before the event.
6. Repeat steps 3-5 for any additional receivers.
1
2
3
4
5
Figure 27: Optional Hearing Assist System