Daktronics Sportsound SSR-300, Operation Manual

Page: 17 / 42

Setup & Operation 13
5.
Bring sliders up slowly and listen for the signal (
Figure 22
).
6. The signal should be visible on the STEREO output meter ( Figure 23 ):
• The amber LEDs indicate that the level is near clip.
• The red LEDs indicate that the signal has reached the digital limit.
REMEMBER:
Bad input = bad output. No adjustment on the mixer can make a poor
source sound better. For best results, be sure to use high-quality audio files from
your MP3 player or laptop, and set the device to near full volume.
Figure 22: Channel Sliders
Figure 23: Output Meter