background image

Introduction

1

1  Introduction

This manual explains the operation of the All Sport

®

 CG (Character Generator) with HD 

(High Definition) video input and output. For additional information regarding safety, 

installation, operation, or service, refer to the telephone numbers listed in 

Section 5: 

Daktronics Exchange and Repair & Return Programs (p�17)

Important Safety Instructions

•  Read and understand all instructions before beginning the installation process.
•  Do not drop the control equipment or allow it to get wet. 
•  Do not disassemble control equipment; failure to follow this safeguard will make the 

warranty null and void. 

•  Always unplug the control equipment when it is not in use. Never yank the power 

cord to pull the plug from the outlet. Grasp the plug and pull to disconnect.

•  Do not let any power cord touch hot surfaces or hang over the edge of a table that 

would damage or cut the cord.

•  If an extension cord is necessary, a three-pronged, polarized cord should be used. 

Arrange the cord with care so that it will not be tripped over or pulled out.

•  Inspect console for shipping damage such as rattles and dents, and verify that 

all equipment is included as itemized on the packing slip. Immediately report any 

problems to Daktronics; save all packing materials if exchange is necessary.

Resources

Figure 1

 illustrates a Daktronics drawing label. 

This manual refers to drawings by listing the last 

set of digits. In the example, the drawing would 

be referred to as 

DWG-1007804

. All references to 

drawing numbers, appendices, figures, or other 

manuals are presented in bold typeface. 

Any drawings referenced in a section are listed 

at the beginning of it as shown below:

Reference Drawing:

System Riser Diagram .......................................................................................

DWG-1007804

Daktronics identifies manuals by the DD or ED number located on the cover page. 

Control Consoles

The All Sport CG HD may be used with an All Sport

®

 controller. These consoles use 

keyboard overlays (sports inserts) to control numerous sports/events and scoreboard 

models. Refer to the following manuals for operating instructions:
• 

All Sport 5000 Series Control Console Operation Manual (ED-11976)

• 

All Sport 5500 Series Control Console Operation Manual (ED-16809)

These manuals are provided on a CD with the control console, and they are also 

available online at 

www.daktronics.com/manuals

.

Drawing Number

Figure 1: 

Drawing Label

Summary of Contents for P1314





































Reviews: