Daktronics OMNISPORT 2000, Operation Manual

Page: 137 / 182

Track Mode Menus & Settings
127
Edit Team Score
This menu is used to manually edit up to 4 team scores for
display on auxiliary team score scoreboards. The asterisk (*)
identifies which team score is selected.
H 000* G1 000
G2 000 G3 000
From 1-TEAM SCORE – [ENTER] or from Main Menu – [2]>[1]
Enter a score of 0 to 999 using the [0]–[9] keys. The asterisk (*) flashes to indicate the score
is ready to enter. Press [ENTER] on the last score to post the scores to the scoreboard and
advance to the Edit – Record Time Menu . To exit without saving the data, press [CLEAR] .
Some operators will use the four scores (H, G1, G2 & G3) as HOME and GUEST for men
and women or HOME and GUEST for varsity and junior varsity. Another option is to post
the men’s scores when a men’s event is finished, and the women’s scores when a
women’s event is finished.
When to use this:
• Typically team scores are updated on the scoreboard after each event is finished
and scored.
Record Time
This menu is used to set an event’s record time to be
displayed.
EDIT TIME
REC: 00:00.0*
From Main Menu – [2]>[2]
Enter a record time using the [0]–[9] keys and press [ENTER] . Press [CLEAR] twice to leave
this unchanged and return to the Edit menu.
Print Menu
The Print Menu is where the operator can print a
specific race result or the settings for the current console
configuration. Refer to Printouts from the Built-in Printer
(p.123) for additional illustrations of available printouts.
Print Race Results
This menu is used to print races that are stored in the
OmniSport 2000 console’s revolving race memory. Each
time the console times a race, that race is assigned a race
number. The race number increments by one each time a
new race is started and counts up from 1 to 999. When the console gets to race number
999, it rolls over and the next race number is 1. The console has enough memory to store
approximately the last 50 races. If the memory in the console is full and a new race
needs to be stored, the console deletes the oldest race in its memory.
PRINT RESULTS
RACE NUMBER 772*
From Main Menu – [3]>[1]
To print a stored race, press the [0]–[9] keys to enter the desired race number and press
[ENTER] . The LCD will then prompt the operator to verify the entered race number.
MENU-EDIT
1-TEAM SCORE
From Edit Menu [ENTER] or [2]
H 089 G1 085
G2 000* G3 000
MENU-EDIT
2-RECORD TIME
MENU-MAIN
3-PRINT MENU
MENU-PRINT
1-RACE RESULTS
From Main Menu – [3]