3.8 Signal Termination Between Two (or More) Signs
RS422 Interconnection
The Primary – Mirror quick connect cable is used to terminate signal between two
displays. The six-foot cable goes from the Primary OUT (J34) on the Primary
display to the Mirror IN (J32) on the Mirror display.
Figure 31: Quick Connect Boards (Input and Output)
Figure 32: Display Interconnect
3.9 First Time Operation
When first operated, the display will run through an initialization or boot up
sequence in which it will display the following:
1.
Product Name (Galaxy®)
2.
Display Size (Row x Column)
3.
Shading (32K RGB)
4.
Bootloader Version (OS X.XX)
5.
Firmware Number (ED13305)
6.
Firmware Revision (Rev X.XX)
7.
Hardware Address (HW:XX)
8.
Software Address (SW:XX)
9.
IP Address: (172.16.192.25)
10.
Subnet Msk: (255.255.0.0)
11.
COM1 Configuration (C1:V15) ((Modem C1:V15) If a Modem is present)
12.
Line Frequency (CLK:60 Hz)
13.
Display Name Description
Electrical Installation
3-16
