Troubleshooting
14
Radio Connections
To determine the radio connection settings between the display and control console,
first power off any radio-equipped consoles in the area, then cycle power to the display,
and watch for the radio settings. These settings appear in different locations based on
the scoreboard layout:
• When using an
All Sport
console, the
RC-200
hand-held controller, or the
DAK Score
mobile app, the display will
show “bX CY” where X is the Broadcast
group number and Y is the Channel
number. The default is b1C1.
• If there is a clock, the settings
appear in the first four clock digits
(
• If there is no clock, the settings
should appear in the Home and
Guest score digits, but this may
vary by scoreboard model.
• Scoreboards capable of displaying speed of pitch may also have separate radio
settings for the second All Sport console controlling those digits.
• When using the
RC-100
hand-held controller, the display will show “CXX”, where the
). The default is channel 01.
If these settings do not appear, the radio receiver may need to be repaired/replaced.
To make sure the channel and broadcast settings of the receiver in the display match
those set in the console/scoring app, refer to the appropriate
Radio Interference
If it has been determined that a nearby display's radio signal is interfering, the settings of
the radio receiver or wireless base station inside the display(s) must be changed.
1�
To locate the radio receiver or base station, simply look for the black antenna sticking
out the front of the display. Component Location drawings also show the exact
position where the radio receiver will be mounted.
2�
Open the access panel to which the receiver is attached as described in
Component Locations & Access (p�5)
The channel selection process varies depending on whether the display is equipped with
an All Sport Radio Receiver or an RC-100/RC-200 Base Station.
DAKTRONICS
HOME
GUEST
QTR
DAKTRONICS
HOME
GUEST
QTR
All Sport / RC-200 / DAK Score
RC-100
Figure 11:
Radio Settings in Clock Digits
RADIO SETTINGS
BCAST 1 CHAN 01
GROUP (1-8): 01
CHAN (1-8): 01
All Sport Radio Settings
RC-200 Radio Settings
DAK Score App Settings
RC-100 Radio Settings
RADIO CHANNEL
DEFAULT: 01
