Troubleshooting
10
Setting the Driver Address
Reference Drawings:
Address Table; Rotary Switches H and L ........................................................
DWG-1198765
Since the same LED drivers can be used for many
display models, each driver must be set to receive
the correct signal input, or address, for the model
in which it is being used.
Addresses are set through the S2 (L) and S3 (H)
rotary switches on the driver (
small flathead screwdriver.
Refer to the tables on the following pages or an
older driver being replaced to determine the
correct address setting. Then see
DWG-1198765
for addressing information of driver addresses
1–255.
Single-Section Models
Model
Driver #
& Address
BA-618
BA-624
BA-2010
BA-2017
BA-2515
BA-2518
BA-2618
A1 61
BA-2715
BA-2718
A1 62
BA-2005
BA-2014
BA-2019
BA-2030
A1 72
A2 70
A3 71
BA-2022**
A1 70
A2 64
BA-2023
BA-2031
BA-2033
BA-2034
BA-2035
A1 3
BA-2032
A1 60
CR-2002
A1 12
CR-2003
A1 12
A2 13
FB-824
FB-4005
MS-915
MS-918
MS-2002*
MS-2006*
MS-2025
MS-3918
SO-918
SO-2918
A1/A2* 11
* Additional driver(s) only for models
with white digits.
** Prior to October 2018:
A1 = 64, A2 = 70.
Tennis Models
Refer to
DWG-1202417
in
Appendix B
for addressing information for up to 12 courts.
H
L
Figure 10:
Driver Address Dials
Model
Driver #
& Address
FB-2030
A1 1
A2 10
MS-2004
MS-2012
A1 74
A2 75
MS-2024
A1 72
A2 73
A3 71
MS-2028
MS-2030
MS-2032
A1/A2* 71
MS-2029
A1 15
A2 71
MS-2126
A1 17
RO-2010
RO-2011
RO-2019
A1 12
SO-2008*
A1/A2* 17
SO-2013*
A1/A3* 13
A2 14
TI-218
TI-2003
TI-2010
TI-2015
TI-2024
A1 2
TI-2012
TI-2019
TI-2032
TI-2034
TI-2035
A1 1
TI-2033
A1 2
A2 1
