5
Personal Security Communicator User Manual
Using your Personal
Security Communicator
Using the memory/
speed dial numbers (M1 & M2)
Your Personal Security Communicator has two
preset speed dial numbers for non-emergency
calls. Press either of these buttons to begin a call,
hold down to cancel. The top green LED will light
up during a call.
SOS functionality
Activating the SOS button will
immediately start an emergency
call through to up to 6 nominated
numbers. It will try each contact
3 times if no answer, before
moving on to the next contact.
The receiver will be prompted
to accept the emergency call
by a voice recording. If you have
chosen professional monitoring,
your device will immediately dial
our 24/7 call centre, and they will
assist you. The top green LED
will light up during the call.
Turning the device on
Press and hold the ON/OFF button
for 2-3 seconds, until the Blue LED
starts flashing. The LED will blink
quickly while searching for the
network. You will hear a voice say
“Device is connected”, and the LED
will flash slowly.
Turning the device off
Press and hold the ON/OFF button
for 2-3 seconds and release, you
will hear a chime, and the device
will vibrate as it switches off.
Checking network
connectivity
When the device is on, press
the ON/OFF button once, to hear
a voice announcement.
