Dakota Micro, Inc.
AC
-
9MQ(‐C2) User Manual
Rev: 06/26/17 Page 5 of 12
Author: CNR
Dakota Micro, Inc. is not responsible for any damages caused to your monitor, or yourself, due to the improper installation
or use of a suction cup monitor mount, whether it be product sold by DM or product purchased from another source.
B. Universal Bracket Mounting
1.
Hold monitors U‐bracket in place on monitor.
2.
Attach bracket with included wing bolts.
C. Finalizing Universal Bracket Installation
1.
With the mount and monitor attached, find and
mark the desired position for the monitor.
2.
Remove the monitor from the mount.
3.
Attach the monitor to the mount and tighten
the wing nuts.
VIII. INSTALLATION
IX. POWER
A.
Supplying Power with 12v Power Adaptor
1.
Attach the power input connector (3 above) to your included 12v cigarette lighter adaptor.
2.
Plug cigarette lighter adaptor into 12v power source.
B. Hardwire Power Adaptor
1.
If you would like to hardwire your power supply, please contact your local AgCam® dealer for available
hardwire power adaptors (AGCO
PN:
AC12VHRDWR
).
2.
Dakota Micro hardwire power adaptors have a maximum circuit capability of 7.5 amp.
C. Fuses
1.
There is a small in‐line glass fuse located on the red and black power wire (3 above). When replacing this fuse,
use a MAX 2amp glass fuse.
2.
There is a small glass fuse located on the inside tip of the 12v portion of the power adaptor (AGCO PN: AC‐12v).
When replacing this fuse, use a MAX 4amp glass fuse.
A. Monitor Wire Harness Details
1.
Input to Monitor
2.
AV1‐4 Event Trigger Wires
(Pg. 6)
3.
Power Input
4.
RCA‐Video Output
5.
AV1 ‐ Audio/Video Input
6.
AV2 ‐ Audio/Video Input
7.
AV3 ‐ Audio/Video Input
8.
AV4 ‐ Audio/Video Input
