6. Align the
Lid
with the
Grill Body
and set it in place. It should rest on the silicone-
rubber gasket. The angled part of the
Lid
should be at the front of the
Grill Body
,
hinges in back.
7. Attach the hinges to the
Lid
and
Grill Body
, as
shown. Using the large #14 self-tapping screws,
tighten the bottom of the hinges first, keeping the
hinges square. Now tighten the tops of the hinges,
holding the
Lid
still (do not push it down while
tightening – this compresses the gasket unevenly and
is undesirable).
DO NOT OPEN LID AT THIS POINT!
8. Connect the
L and R Lid Stop Brackets
to the back of
the
Grill Body
, as shown at right, using two self-
tapping screws each. (The
L Lid-Stop Bracket
is
pictured.) Now when the lid is opened, it should rest
on the rubber grommets attached to the lid stops.
Note: The flange on the lid stop brackets will extend
past the side of the grill. (If not, you have them
reversed.)
9. Open the
Lid
and attach the
Lid Handle
, as
shown at right, using four self-tapping screws.
Note: The handle angles down and towards
you.
Close the
Lid
.
(605) 847-4713
(605) 847-4713
44136 200th St.
44136 200th St.
5/8
www.dakotagrills.com
www.dakotagrills.com
Lake Preston, SD 57249
Lake Preston, SD 57249
(Back)
(Left)
