Manual # 650423A
10. Both cables should be routed through the stock indicator light opening; the system is ready for re-
installation into the dash if it was removed.
24” CAT5
connecting both halves
36” CAT5 to control box
11. Next, the entire console will need to be removed. Looking at the picture of the console from
the bottom, you can see there are four (4) mounting points. Make sure to disconnect all
electrical connections and save all hardware for reinstallation.
12. Remove the gauge cluster from the console by removing the four (4) screws holding the
cluster to the console. Also remove the top screws that hold the bezel to the housing as
shown in the picture. The bezel and screws will be reused for the new gauges.
Summary of Contents for VHX-69C-CAC
Page 8: ...Manual 650423A ...
