Manual # 650429C
5. Peel the paper off the two block-off lenses needed for the back of the housing appropriate
for your vehicle. Place them shiny side down in the two indicator openings. Use silicone to
hold them in place and avoid handling until the silicone has cured.
4. Once the VHX gauges are secured to the bezel; connect the 12” CAT5 cable to the Tachometer, and
the other end to either port on the Speedometer, connecting the two halves. With the 36” CAT5
cable, connect one end to the open port on the Speedometer, and as the assembled cluster is
installed into the dash, carefully route the other end of the cable to the control box mounting location.
636234-B
636243-A
636234-C
636234-B
1977 Style
1968-‘76 Style
6. With the block-off lens in place, place the VHX center gauges over the back of the center bezel
and secure the system by using the four (4) stock mounting screws.
