Manual # 650429C
2. Remove the stock gauges, separator plate, and lenses from the bezels. For the main cluster,
reattach the lens spacer to the bezel after removing the lens as shown (white arrows). The only
items to be reused are the original front bezels and gauge mounting hardware. Now is a good time
to clean or refinish the bezels.
3A. The Speedometer and Tachometer are interchangeable side to side. Choose the orientation you
prefer, then place the Speed and Tach on the main lens spacers and secure the gauges with the
six (6) stock mounting screws. Use two (2) stock mounting screws to attach the ABS plastic
brackets to the bezel and thumb screws to secure the brackets to the VHX gauges.
3B. Dashes with the vent by the driver’s right knee
will use the extended ABS bracket for proper
Mounting.
