MAN#650238
A
f
t
e
r
m
a
t
e
rial is removed, test fit onto Dakota Digital gauge cluster to check for
interference.
If no more trimming needs to be done, press lenses into the gauge separator panel
and use RTV/Silicone on the back to hold them into place. Since the center lens
does not have a ledge to sit on, try to match the height of the outer lenses.
Fuel/Volts lens goes on the left, Oil/Water lens goes on the right.
When the adhesive is dry, attach Dakota Digital gauge cluster to gauge separator
panel. Re-install clear lens.
Install the cluster using the screws that
held on the original cluster.
See instruction manual for remainder of
installation.
WARNING:
This product can expose you to chemicals including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm. For more information go to
