Dakota Digital HDX-58C-IMP Instrument Installation Download Page 3

Page: 3 / 4

Manual # 650649

6. Re-install the cluster into the vehicle and refer to the main manual for wiring instructions to

complete the HDX installation.

4. Secure the HDX system to the bezel by using the (8) eight supplied ½” screws. Watch

carefully as you insert the system so you don’t scratch or damage the lens or switch buttons.

5. Connect the provided harness and the buzzer (optional for audio feedback) to the back of the

HDX system.

7. Removing the stock gauge eliminates the illumination for the gear indicator during headlight. The

supplied gear indicator block off lens can be used if so desired.

Buzzer Connector

Summary of Contents for HDX-58C-IMP

Page 1: ...ument Installation For 1958 Impala Your new HDX 58C IMP kit includes Installation Control Box 8x 8 32 x 1 2 Screws Universal Sender Pack Installation Manuals HDX Display 1 Remove the stock gauge cluster from the dash Block off Lens Buzzer Main Harness ...

Page 2: ... should be left with a bare bezel Drill at these points 2 Remove the stock gauge housing from the bezel by removing the 8 eight screws on the rear of the metal housing The only item to be reused is the original front bezel the other pieces can be discarded Now is a good time to clean or refinish the bezel Bare housing ready for HDX assembly ...

Page 4: ...e harm For more information go to www P65Warnings ca gov 9 Peel off the protective paper and lay the block off lens flat in the gear indicator opening Use silicone to adhere the lens to the lower dash bezel 8 With the lower dash bezel already out remove the two mounting screws to remove the indicator plate and lens 10 Reassemble lower dash bezel when the silicone has cured ...