Dakota Digital Sensor Pack
Dakota Digital Part Number 393050
This universal sensor kit, supplied with all Dakota Digital
sensors and harnesses needed to complete
used adaptor bushings to allow simpler installation into various applications.
The oil pressure and water temp sensor provided in this kit MUST be used with your Dakota Digital display
system, using stock or other aftermarket sensors will result in incorrect readings, gauges not working at all, or
damage to the Dakota Digital control module
speedometer cable driven applications to convert to an electronic signal.
speed sensor or have an ECM that provides a
wired directly to the control module. A
accept a wide range of stock sensors as well as a custom ca
offers a universal fuel sensor, part number
Dakota Digital provides commonly used
the universal nature of the systems
it may be necessary to source additional adaptors, fittings or
Typically, brass plumbing fittings from a hardware store
application. The threads on the oil pressure a
other larger sized fittings. If necessary, t
of thread sealant or tape.
The Sensor Package includes the following parts
Ford Adaptor Cable for Speed Sensor
(Included in certain applications
16,000 PPM Speed Sensor
with harness
1/8” NPT > 1/4”, 3/8”, and 1/2” NPT B
0-100 PSI Solid State Oil Pressure S
with harness
1/8” NPT > 12 and 16 mm Bushings
with crush washers
100-300˚F Isolated Water Temp Sensor (40
with harness
Momentary Push Button Switches
Package
akota Digital Part Number 393050
sensor kit, supplied with all Dakota Digital integrated instrument systems
harnesses needed to complete the installation. This kit also contains an assortment of
allow simpler installation into various applications.
oil pressure and water temp sensor provided in this kit MUST be used with your Dakota Digital display
other aftermarket sensors will result in incorrect readings, gauges not working at all, or
akota Digital control module. The speed sensor provided can be used for
cable driven applications to convert to an electronic signal. If you are currently
or have an ECM that provides an electronic vehicle speed output (VSS)
A fuel level sensor is not supplied as the Dakota Digital control module
accept a wide range of stock sensors as well as a custom calibration for universal installations
part number SEN-06-1.
commonly used hardware to expedite the installation of its sensor
s and the variety of vehicles and drivetrains they are installed within,
additional adaptors, fittings or wiring to fit the specific application
brass plumbing fittings from a hardware store provide a simple solution to a unique mounting
. The threads on the oil pressure and water temp sensor are 1/8” NPT and
If necessary, the threads on the sensors in this kit may
includes the following parts:
ensor
(Included in certain applications)
Bushings
Oil Pressure Sensor
ensor (40-150˚C)
MAN#650311
systems includes the required
tains an assortment of commonly
oil pressure and water temp sensor provided in this kit MUST be used with your Dakota Digital display
other aftermarket sensors will result in incorrect readings, gauges not working at all, or
. The speed sensor provided can be used for mechanical
If you are currently using an electronic
(VSS), these signals may be
s the Dakota Digital control module can
libration for universal installations. Dakota Digital
installation of its sensors, but due to
trains they are installed within,
wiring to fit the specific application.
provide a simple solution to a unique mounting
nd water temp sensor are 1/8” NPT and easily adaptable to
this kit may be sealed with the use
