6.
alert Mode
When the PR-2500 receives an alert, the LCD display changes to alert mode. The dis-
play will remain in alert mode, showing the most recent alert received until manually
reseting to time/date mode. Push the right button to change from the alert mode
to the time/date mode.
Programming the receiver
Push the side and right buttons at the same time to enter the programming mode.
There are four different programming screens. Pushing the side button will scroll
through the programming screens. The different programming screens are:
1. Time and Date setting
2. Audible tone ON/OFF
3. Vibrate alert ON/OFF
4. Frequency setting
Pushing the side button again after the frequency setting screen will return you to
the time/date mode. If no button is pushed in programming mode for 8 seconds the
display will automatically return to the time/date mode.
NOTE: The display must be in the time/date mode to access the programming
screens.
